BRJSC - HI-TEMP OIL 101

  • MSDS: BRJSC
  • Manufacturer: E F HOUGHTON AND CO
  • Product Name: HI-TEMP OIL 101
  • National Stock Number: 9150-00N038925
Product Identification

Product ID:HI-TEMP OIL 101
MSDS Date:06/08/1990
FSC:9150
NIIN:00N038925
MSDS Number: BRJSC

Responsible Party
E F HOUGHTON & CO
VALLEY FORGE, PA 19482
US

Emergency Phone: 215-666-4105

Info Phone: 215-666-4105

Preparer: ROBERT E. WILLIAMS

Cage: 73227

Contractor
HOUGHTON INTERNATIONAL INC
930 VALLEY FORGE, PA 19482-0930 US

Telephone: 610-666-4105

Cage: 73277

Ingredients

SOLVENT REFINED HYDROTREATED RESIDUAL OIL; (MINERAL OIL)

CAS: 64742-57-0

Fraction By Weight: >60%

OSHA PEL N/K

ACGIH TLV: N/K


POLYBUTANE (POLYMER)

CAS: 9003-28-5

Fraction By Weight: 10-30%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: AVOID BREATHING PRODUCT
MISTS. BREATHING MISTS IN EXCESS OF TLV MAY CAUSE IRRITATION OF
UPPER RESPIRATORY TRACT. PERSONS WITH CHRONIC RESPIRATORY DISEASE
MAY SHOW INCREASED SYMPTOMS DUE TO IRRITATION. SKIN: MAY BE A MILD
IRRITANT ON PROLONGED USE. EYE: MILD IRRITANT. INGEST: NO (EFTS OF
OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: SIGNIFICANT EFFECTS KNOWN. CHRONIC:
UNKNOWN FOR THIS PRODUCT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE TO SOURCE OF FRESH AIR. SKIN: WASH WITH SOAP
AND WATER. EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES; CONSULT
PHYSICIAN IF IRRITATION PERSISTS. INGEST: DO NOT INDUCE VOMITING;
GIVE LIQU IDS, CONSULT PHYSICIAN. PRODUCT IS MAINLY MINERAL OIL.

Fire Fighting

Flash Point Method:COC
Flash Point:630F,332C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . TREAT AS AN OIL FIRE.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:APPLY DRY OIL ABSORBENT TYPE MATERIAL AND
SWEEP UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT W/STRONG OXIDIZERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR REQUIRED ONLY IF
TLV OIL MIST IS EXCEEDED.
Ventilation:GENERAL VENTILATION. IF MISTING, USE LOCAL EXHAUST TYPE.
Protective Gloves:IMPERVIOUS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:<0.001
Vapor Density:>20
Spec Gravity:0.90
Evaporation Rate & Reference:<0.01(BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT AMBER FLUID, BLAND ODOR
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL; OXIDES OF CARBON.

Disposal

Waste Disposal Methods:FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS FOR
DISPOSAL OF WASTE PETROLEUM OIL. MAY BE INCINERATED UNDER
CONTROLLED CONDITIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.